Description
350 HO DeluxeForget rebuilding! Our 350 HO is assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec Small-Block ever installed at the factory: 333 hp and a satisfying 381 lb.-ft. of torque. It's affordable power with dependability you can count on A cast-iron block with four-bolt main caps is the foundation for the 350 HO topped with iron Vortec heads fitted with 1.94/1.50-inch valves Rotating assembly has aluminum pistons delivering a 9.0:1 compression ratio Hydraulic flat-tappet camshaft requires no periodic lash adjustments The intake manifold, carburetor and distributor are included, but not installed
Highlights
- 333 hp and a satisfying 381 lb.-ft. of torque. It's affordable power with dependability you can count on
- A cast-iron block with four-bolt main caps is the foundation for the 350 HO
- Topped with iron Vortec heads fitted with 1.94/1.50-inch valves
- Rotating assembly has aluminum pistons delivering a 9.0:1 compression ratio
- Hydraulic flat-tappet camshaft requires no periodic lash adjustments
Specifications
- Crate Engine Type: Deluxe Crate Engine
- Engine Displacement: 350 cu. in.
- Horsepower: 333 horsepower
- Compression Ratio: 9.1:1
- Torque: 381 ft./lbs.
- Maximum RPM: 5,100
- Camshaft Type: Hydraulic Flat Tappet
- Cylinder Head Material: Cast Iron
- Piston Material: Cast Aluminum
- Crankshaft Material: Nodular Iron
- Combustion Chamber Volume: 64cc
- Camshaft Duration (.050 in): 212° intake / 221° exhaust
- Camshaft Lift (in): .435 intake / .460 exhaust
- Bore x Stroke (in): 4.000" x 3.480"
- Carburetor Included: Yes
- Intake Manifold Included: Yes
- Distributor Included: Yes
- Connecting Rod Material: Powdered Metal
- Valve Covers Included: Yes
- Assembled: Yes
- Engine Balance: External
- Cylinder Heads Included: Yes
- Rear Main Seal Style: 1-piece
- Throttle Body Included: No
- Oil Pan Included: Yes
- Timing Cover Included: Yes
- Water Pump Included: No
- Harmonic Balancer Included: Yes
- Flexplate Included: Yes
- Flywheel Included: No
- Air Cleaner Included: Yes
- Spark Plugs Included: Yes
- Spark Plug Wires Included: Yes
- Computer Included: No
- Wiring Harness Included: No
- Cylinder Head Style: Assembled
- Intake Valves Included: Yes
- Intake Valve Diameter: 1.94"
- Exhaust Valves Included: Yes
- Exhaust Valve Diameter: 1.5"
- Camshaft Included: Yes
- Cylinder Heads: Vortec
- Rocker Arms: Stamped Steel
- Rocker Arm Ratio: 1.5:1
- Block: 4 bolt main
- MFG. Part #: 19420879
- Sold in Quantity: Each
- Spark Plug Style: Straight
- Recommended Fuel: Premium
- Brand: Chevrolet Performance Parts
Emissions Notice
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
